Manuals

On this page are links to manuals for our monitors. You may view these designs online, or download them for printing. If you would like access to these manuals, please contact us for the username and password. Because of their size, these files may take several minutes to download.

Contents: IMPAX | IMPAX-SK | IMPAX TSS | IMPAX PASS | Sensors

IMPAX Manuals

Instruction manuals for IMPAX process monitors:

• IMPAX Channel Definition Sheet (PDF, 16KB)
• IMPAX 2000 Setup Sheet (PDF, 1040KB)
• IMPAX 2000 User's Guide (PDF, 539KB)
• IMPAX 2000 Supervisor's Guide (PDF, 551KB)
• IMPAX 1000 User's Guide (PDF, 643KB)
• IMPAX 1000 Supervisor's Guide (PDF, 644KB)
• IMPAX 500 User's Guide* (PDF, 568KB)
• IMPAX 500 Supervisor's Guide* (PDF, 606KB)
  
• IMPAX 3500 User's Guide* (PDF, 393KB)
*Note: IMPAX 500 & 3500 are no longer in production

IMPAX SK Manuals

Instruction manuals for 'NEW GENERATION' IMPAX-SK process monitors:

• IMPAX-SK Teleservice Instructions
• IMPAX-SK 200/300 Process Monitor Manual (PDF, 2.3MB)
• IMPAX-SK 400 Process Monitor Manual (PDF, 3.8MB)
• IMPAX-SK 500/600 Process Monitor Manual (PDF, 8.1MB)
• IMPAX-SK 800 Process Monitor Manual (PDF, 7.5MB)

Instruction manuals for 'LEGACY' IMPAX-SK process monitors:

• IMPAX-SK 1 Process Monitor Manual (PDF, 3.8MB)
• IMPAX-SK 4 Process Monitor Manual (PDF, 2.9MB)
• IMPAX-SK 4 Reference Sheet (PDF, 307KB)
• IMPAX-SK 2/SK 5 Process Monitor Manual (PDF, 5.8MB)
• IMPAX-SK 2/SK 5 Reference Sheet (PDF, 104KB)
• IMPAX-SK 4c Main Menu Sheet (PDF, 14KB)
• IMPAX-SK 5 Main Menu Sheet (PDF, 8KB)
• IMPAX-SK 5 Service Menu Sheet (PDF, 9KB)
• IMPAX-SK 7 Process Monitor Manual (PDF, 6.3MB)
• IMPAX-SK 420/440 Emtec Process Monitor Manual* (PDF, 4.3MB)
  *Note: IMPAX-SK 420/440 is no longer in production

IMPAX TSS Manuals

Instruction manuals for IMPAX TSS productivity monitors and software:

• IMPAX TSS System Preinstall Worksheet (Doc, 57KB)
• IMPAX TSS Monitor Install Sheet (Doc, 28KB)
• IMPAX TSS Monitor Manual (PDF, 807KB)
• IMPAX TSS-NET Software Install Sheet (Doc, 57KB)
• IMPAX TSS-NET Software Manual (PDF, 790KB)

Instruction manuals for IMPAX PASS process monitors:

• IMPAX PASS Monitor Manual (PDF, 106KB)

Sensor Installation Guides and Diagrams

Technical details for preparing tools, backing plates, wedges, and holders to accommodate our piezo sensors:

• Piezo Disk Sensor Installation Manual (PDF, 27KB)
• Cartridge Sensor Installation Manual (PDF, 10KB)
• Standard Piezo Disk Sensor Replacement Manual (PDF, 1.3MB PDF)
• Piezo Flat Disk Sensor Schematic Image (JPEG, 179KB)
• Superflex Sensor Installation (PDF, 112KB)
• Diagram: National Die Backing Plate, 1 (Piezo Disk Sensor) (PDF, 217KB)
• Diagram: National Die Backing Plate, 2 (Piezo Disk Sensor) (PDF, 226KB)
• Diagram: National Die Backing Plate, 3 (8mm and 1/4" Fit) (PDF, 168KB)
• Diagram: National Adjustment Wedge (Piezo Disk Sensor) (PDF, 180KB)
• Diagram: Typical Superflex Sensor Pocket (8mm Torque Fit) (PDF, 211KB)
• Diagram: Basic Die Backer Plate Drawing for Superflex(8mm Torque Fit) (PDF, 211KB)
• Diagram: Typical Cartridge Sensor Pocket (8mm and 1/4" Fit) (PDF, 126KB)
• Diagram: National PKO Wedge, 1 (Piezo Disk Sensor) (PDF, 177KB)
• Diagram: National PKO Wedge, 2 (Piezo Disk Sensor) (PDF, 141KB)
• Diagram: First Wedge for a National Nutformer (Piezo Disk Sensor) (PDF, 144KB)
• Diagram: Trim Wedge for a National Boltmaker (Piezo Disk Sensor) (PDF, 167KB)
• Diagram: Chucker Drill/Tap Holder, 1 (Piezo Strip Sensor) (PDF, 184KB)
• Diagram: Chucker Drill/Tap Holder, 2 (Piezo Strip Sensor) (PDF, 170KB)

In order to view documents in PDF format, you will need Adobe's Acrobat Reader, a free program available at Adobe's Site. In order to unzip documents in Zip format, you will need Winzip, a shareware program available at Winzip's Site.

Return to Service & Support